Buy LCD
 
TV or not TV?
Home

Bookmark this Page

 

RSS FEED

BestBuyLCD BestBuyLCD

SAMSUNG LN15S51B

User Rating: / 1
PoorBest 
Written by BestBuyLCD.com   
Tuesday, 21 April 2009 13:55
Article Index
SAMSUNG LN15S51B
INSTALLATION
All Pages
YOUR NEW TV

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.

For more information on connecting equipment, see pages 6~12.

<LN15S51B> <LN20S51B>
PC IN

Connect to the video output port on your PC.

COMPONENT IN(480i/480p)

Connect a component video/audio.

S-VIDEO IN

Connect an S-Video signal from a
camcorder or VCR.

ANT IN

Connect to an antenna or to a cable
TV system.

PC AUDIO IN

Connect to the audio output jack on your PC.


AV IN

Video and audio inputs for external
devices, such as a camcorder or VCR.

KENSINGTON LOCK

(See page 56)

POWER INPUT

Connect the supplied power cord.


English-1



01 BN68-00816A-00.qxd 2/1/05 4:14 PM Page
6



Chapter Two
INSTALLATION

Connecting VHF and UHF Antennas

If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads” below.


If your antenna has one lead that looks

like this, see “Antennas with 75-ohm
Round Leads” on page 7.


If you have two antennas, see “Separate
VHF and UHF Antennas” on page 7.

Antennas with 300-ohm Flat Twin Leads

If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.

1

Place the wires from the
twin leads under the
screws on a 300-75 ohm
adaptor (not supplied)
.
Use a screwdriver to
tighten the screws.



2

Plug the adaptor into
the ANT IN terminal on
the back of the TV.


English-2



01 BN68-00816A-00.qxd 2/1/05 4:14 PM Page
7



INSTALLATION

Antennas with 75-ohm Round Leads

1

Plug the antenna lead
into the ANT IN terminal
on the back of the TV.



Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV.
This procedure requires an optional combiner-adaptor (available at most electronics shops)
.


1

Connect both antenna
leads to the combiner.

UHF
VHF
ANT IN
UHF
VHF
2

Plug the combiner into
the ANT IN terminal on
the back of the TV.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

Because this TV is cable-ready, 1 you do not need a cable box to
Plug the incoming

view unscrambled cable channels.

cable into the ANT IN
terminal on the back
of the TV.


English-3



01 BN68-00816A-00.qxd 2/1/05 4:14 PM Page
8



INSTALLATION

Connecting to a Cable Box that Descrambles All Channels

This terminal might be labeled1 “ANT OUT”, “VHF OUT”, or
Find the cable that is

simply, “OUT”.

connected to the
ANT OUT terminal on
your cable box.


ANT IN ANT OUT
2

Connect the other end
of this cable to the
ANT IN terminal on the
back of the TV.


Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)

ANT IN
This terminal might be labeled

1

“ANT IN”, “VHF IN”, or simply,

Find and disconnect

“IN”.

the cable that is
connected to the
ANT IN terminal on
your cable box.



2

Connect this cable to a
two-way splitter.

3

Connect a RF cable

Incoming
cable

Splitter
between an OUTPUT
terminal on the splitter
and the IN terminal on
the cable box. Incoming
cable
Splitter
Cable Box

English-4



01 BN68-00816A-00.qxd 2/1/05 4:14 PM Page
9



INSTALLATION

4

Connect an RF cable
between the ANT OUT
terminal on the cable
box and the B–IN
terminal on the A/B
switch.

5

Connect another cable
between the other
OUT terminal on the
splitter and the A–IN
terminal on the RF
(A/B) switch.

6

Connect the last
RF cable between the
OUT terminal on the
RF (A/B) switch and
the ANT IN terminal on
the rear of the TV.

Incoming
cable
Splitter


RF (A/B)
Cable Box

Switch

Incoming
cable
Splitter
Cable Box
RF (A/B)
Switch
Incoming
cable
Splitter
TV Rear

RF (A/B)
Cable Box Switch


ANT IN


After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)

English-5



01 BN68-00816A-00.qxd 2/1/05 4:14 PM Page 10





Comments
Search
Only registered users can write comments!

3.26 Copyright (C) 2008 Compojoom.com / Copyright (C) 2007 Alain Georgette / Copyright (C) 2006 Frantisek Hliva. All rights reserved."

 
 
Buy LCD
 


Copyright © 2017 BestBuyLCD. All Rights Reserved. Design by Arte-Web.it