Buy LCD
 
TV or not TV?
Home

Bookmark this Page

 

RSS FEED

BestBuyLCD BestBuyLCD

SONY KDLV26XBR1

User Rating: / 1
PoorBest 
Written by BestBuyLCD.com   
Tuesday, 21 April 2009 15:14
Article Index
SONY KDLV26XBR1
Watching the TV
All Pages
2-599-864-12(1)

LCD Digital Color TV

Operating Instructions

KDL-V26XBR1
KDL-V32XBR1
KDL-V40XBR1


© 2005 Sony Corporation



Owner’s Record

The model and serial numbers are located at the rear of the LCD TV,
below the Sony logo, on the sticker, and also on the TV box (white
label). Record these numbers in the spaces provided below. Refer to
them whenever you call upon your Sony dealer regarding this product.

Model No.

Serial No.

Contacting Sony

If, after reading the following instructions, you have additional
questions related to the use of your Sony® TV, Please call one of the
following numbers.

Customers in the continental United States contact the Direct
Response Center at:
1-800-222-SONY (7669)
Customers in Canada contact the Customer Relations Center at:
1-877-899-SONY (7669)



WARNING

To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
This symbol is intended to
alert the user to the presence
of uninsulated “dangerous
voltage” within the
product’s enclosure that
may be of sufficient
magnitude to constitute a
risk of electric shock to
persons.


This symbol is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the
appliance.

The apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.

CAUTION

To prevent electric shock, do not use this
polarized AC plug with an extension cord,
receptacle or other outlet unless the blades can
be fully inserted to prevent blade exposure.

Note on Caption Vision

This TV provides display of TV closed
captioning in accordance with §15.119 of the
FCC rules.

For Customers in the United
States

If you have any questions about this product,
you may call; Sony Customer Information
Services Center 1-800-222-7669 or
http://www.sony.com/

Declaration of Conformity

Trade Name: SONY
Model: KDL-V26XBR1/KDL-V32XBR1/
KDL-V40XBR1
Responsible Party: Sony Electronics Inc.
Address: 16450 W. Bernardo Dr,
San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230


This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference received,
including interference that may cause
undesired operation.


NOTIFICATION

This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:

s Reorient or relocate the receiving
antenna.
s Increase the separation between the
equipment and receiver.
s Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
s Consult the dealer or an experienced
radio/TV technician for help.

You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.

For Customers in Canada

This Class B digital apparatus complies with
Canadian ICES-003.

Safety

s Operate the TV only on 120-240 V AC.
s Use the AC power cord specified by Sony
and suitable for the voltage where you use
it.
s The plug is designed, for safety purposes,
to fit into the wall outlet only one way. If
you are unable to insert the plug fully into
the outlet, contact your dealer.

s If any liquid or solid object should fall
inside the cabinet, unplug the TV
immediately and have it checked by
qualified service personnel before
operating it further.
s If you will not be using the TV for several
days, disconnect the power by pulling the
plug itself. Never pull on the cord.
s For details concerning safety precautions,
see “Important Safety Instructions” on
page 4 and “Important Safeguards” on
page 5.

Installing

s The TV should be installed near an easily
accessible power outlet.
s To prevent internal heat buildup, do not
block the ventilation openings.

s
Do not install the TV in a hot or humid
place, or in a place subject to excessive
dust or mechanical vibration.

s
Avoid operating the TV at temperatures
below 41°F (5°C).

s
If the TV is transported directly from a
cold to a warm location, or if the room
temperature changes suddenly, the picture
may be blurred or show poor color due to
moisture condensation. In this case,
please wait a few hours to let the moisture
evaporate before turning on the TV.

s
To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling or
to cover the windows that face the screen
with opaque drapery. It is desirable to
install the TV in a room where the floor
and walls are not of a reflective material.

CAUTION

Use the following Sony appliance(s) only with
the following WALL-MOUNT BRACKET.

Use with other WALL-MOUNT BRACKET
may cause instability and possibly result in
injury.

SONY APPLIANCE MODEL NO.

KDL-V26XBR1

KDL-V32XBR1

KDL-V40XBR1

SONY WALL-MOUNT BRACKET MODEL NO.

SU-WL31 (KDL-V26XBR1/KDL-V32XBR1)

SU-PW2 (KDL-V40XBR1)

To Customers

Sufficient expertise is required for installing the
specified product. Be sure to subcontract the
installation to Sony dealers or licensed
contractors and pay adequate attention to safety
during the installation.

(Continued)


For Customers in the United States

This product contains mercury. Disposal of this product may be regulated
if sold in the United States. For disposal or recycling information, please
contact your local authorities or the Electronics Industries Alliance
(http://www.eiae.org).

To Sony Dealers

For installation of SONY WALL-MOUNT BRACKET, be sure to read
and follow the instructions supplied with those optional products.

Note

This digital television is capable of receiving analog basic, digital basic
and digital premium cable television programming by direct connection to
a cable system providing such programming. A security card provided by
your cable operator is required to view encrypted digital programming.
Certain advanced and interactive digital cable services such as
video-on-demand, a cable operator’s enhanced program guide and
data-enhanced television services may require the use of a set-top box. For
more information call your local cable operator.

This television also includes a QAM demodulator which should allow you
to receive unscrambled digital cable television programming via
subscription service to a cable service provider. Availability of digital
cable television programming in your area depends on the type of
programming and signal provided by your cable service provider.

Trademark Information

CableCARD™ is a trademark of Cable Television Laboratories, Inc.

TruSurround XT, SRS 3D Mono and the


symbol are trademarks of
SRS Labs, Inc. TruSurround XT and SRS 3D Mono technologies are
incorporated under license from SRS Labs, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and
BBE symbol are trademarks of BBE Sound, Inc.

Macintosh is a trademark licensed to Apple Computer, Inc., registered in
the U.S.A and other countries.

WEGA, WEGA GATE, Steady Sound, Digital Reality Creation and
CineMotion are registered trademarks of Sony Corporation.

“PlayStation” is a trademark of Sony Computer Entertainment, Inc.


Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.


This TV incorporates High-Definition

Multimedia Interface (HDMI™) technology.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7)
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8)
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.


9)
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11) Only use attachments/accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.


13) Unplug this apparatus during lightning storms or
when unused for long periods of time.

14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.


Important
Safeguards

Before using your TV, please read these instructions completely, and
keep this manual for future reference.

Carefully observe and comply with all warnings, cautions and
instructions placed on the unit or described in the operating instructions
or service manual.

WARNING

To guard against injury, the following basic safety precautions should be
observed in the installation, use and servicing of the unit.

Use
Power Sources

This unit should be operated only from the type of
power source indicated on the information label.
If you are not sure of the type of electrical power
supplied to your home, consult your dealer or
local power company.

120~240V AC
Grounding or Polarization

This unit is equipped with a polarized AC power cord plug (a plug
having one blade wider than the other), or with a three-wire grounding
type plug (a plug having a third pin for grounding). Follow the
instructions below:

For the unit with a three-wire grounding type
AC power cord plug (Class 1 unit)

This unit must be connected to an AC power socket
outlet with a protective earthing connection.


For the unit with a polarized AC
power cord plug

This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug.
If the plug still fails to fit, contact your electrician to have a suitable
outlet installed. Do not defeat the safety purpose of the polarized plug by
forcing it in.



Wall outlet

Do not use a poor fitting outlet.

Insert the plug fully into the outlet. If it is loose, it
may cause arcing and result in fire.

Contact your electrician to have the outlet
changed.

Wiring


For your safety, unplug the AC power cord when wiring cables.

Electric shock

Do not touch the AC power cord or the unit with a
wet hand. If you plug/unplug the AC power cord
from the unit with a wet hand, it may cause electric
shock.

Cleaning

s
Clean the AC power plug regularly.

If the plug is covered with dust and it picks

up moisture, its insulation may deteriorate

and result in fire. Unplug the AC power

plug and clean it regularly.


s
Unplug the AC power cord when
cleaning this unit. If not, it may result
in electric shock.

s
Clean the cabinet of the TV with a dry
soft cloth. To remove dust from the
screen, wipe it gently with a soft cloth.
Stubborn stains may be removed with
a cloth slightly dampened with a solution of mild soap and warm
water. Never use strong solvents such as thinner or benzine for
cleaning.


s
If using a chemically pretreated cloth, please follow the
instruction provided on the package.

s
If the picture becomes dark after using the TV for a long period of
time, it may be necessary to clean the inside of the TV. Consult
qualified service personnel.

Overloading

Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity,
since this can result in fire or electric shock.

Power

Always turn the unit off when it is not being used.
When the unit is left unattended and unused for
long periods of time, unplug it from the wall outlet
as a precaution against the possibility of an
internal malfunction that could create a fire
hazard.

Sound

If a snapping or popping sound from the TV is
continuous or frequent while the TV is operating,
unplug the TV and consult your dealer or service
technician. It is normal for TV’s to make
occasional snapping or popping sounds,
particularly when being turned on or off.


AC Power Cord

If you damage the AC power cord, it may result in fire or electric shock.
s Do not pinch, bend, or twist the cord excessively. The core lines
may be bared and cut, and cause short-circuit, resulting in fire or
electric shock.
s Do not convert or damage the AC power cord.
s Do not put anything heavy on the AC power cord. Do not pull the
AC power cord.
s Keep the AC power cord away from heat sources.
s Be sure to grasp the plug when disconnecting the AC power cord.
If the AC power cord is damaged, stop using it and ask your dealer or
Sony service center to exchange it.

Batteries

Do not dispose of batteries in a fire.
Do not short circuit, disassemble or overheat the batteries.


Disposal of used batteries

To preserve our environment, dispose of used batteries according to your
local laws or regulations.

Ventilation holes

Never push objects of any kind into the unit through
the cabinet slots as they may touch dangerous
voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind
on the unit.

Objects and Liquid Entry

Do not place any objects on the unit.
The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.



(Continued)


Attachments

Do not use attachments not recommended by the
manufacturer, as they may cause hazards.

Medical institution

Do not place this unit in a place where medical
equipment is in use.

It may cause malfunction of medical instruments.


Moisture and flammable objects

s
Do not use plugged sets near water — for
example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, etc. It
may result in fire or electric shock.


s
Do not let this unit get wet. Never spill liquid
of any kind on the unit. If any liquid or solid
object does fall through, do not operate the
unit. It may result in electric shock or
damage to the unit. Have it checked
immediately by qualified personnel.


s
To prevent fire, keep flammable objects or open flame (e.g.
candles) away from the unit.

Accessories

Do not place the unit on an unstable cart, stand, table
or shelf. The unit may fall, causing serious injury to a
child or an adult and serious damage to the unit. No
part of the TV should overhang any edge of the TV
cart or stand; any overhanging edge is a safety hazard.
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.


Broken pieces

Do not throw anything at the unit.
The screen glass may break by the impact and cause serious injury.


Cable wiring

Take care not to catch your feet on the cables. It may damage the unit.

Heat

Do not touch the surface of the TV.
It remains hot, even for some time after the TV is turned off.


Volume adjustment

s Adjust the volume so as not to trouble your neighbors. Sound
carries very easily at night time. Therefore, closing the windows
or using headphones is suggested.
s When using headphones, adjust the volume so as to avoid
excessive levels, as hearing damage may result.

Disposal of the TV

s
Do not dispose the TV with general household waste.

s
The LCD contains a small amount of liquid crystal. The
fluorescent tube used in this display contains mercury. Follow
your local ordinances and regulations for disposal.

Handling of broken glass and liquid crystal
leakage

If the LCD panel gets damaged, crystalline liquid leakage may occur, or
scattered broken glass may result. Do not touch broken glass or
crystalline liquid (which is toxic), with bare hands as cuts or poisoning/
skin irritation may occur. Also, do not let glass fragments or leaked
crystalline liquid get into your eyes or mouth. Should either contact your
eyes or mouth, rinse the contacted area thoroughly with water and
consult your doctor.

LCD screen

s Although the LCD screen is made with high-precision technology
and has effective pixels of 99.99% or more, black dots may appear
or bright points of light (red, blue, or green) may appear constantly
on the LCD screen. This is a structural property of the LCD panel
and is not a malfunction.
s Do not expose the LCD screen surface to the sun. Doing so may
damage the screen surface.
s Do not push or scratch the LCD screen, or place objects on top of
the TV. The image may be uneven or the LCD panel may be
damaged.
s If the TV is used in a cold place, a smear may occur in the picture
or the picture may become dark. This does not indicate a failure.
These phenomena improve as the temperature rises.
s Ghosting may occur when still pictures are displayed
continuously. It may disappear after a few moments.
s The screen and cabinet get warm when the TV is in use. This is not
a malfunction.
s Avoid spraying insect repellent with volatile material to the
screen.
s Avoid prolonged contact with rubber or plastic made material.

Fluorescent lamp

This TV uses a special fluorescent lamp as its light source. If the screen
image becomes dark, flickers, or does not appear, the fluorescent lamp
has run down and should be replaced. For replacement, consult qualified
service personnel.

Installation and moving

Carry the TV in the specified manner

Carrying the TV requires at least two people.

If you carry the TV in a manner other than that specified and without the
specified number of persons, it may drop and a serious injury may result.
Be sure to follow the instructions given below.

s Carry the TV with the specified number of
persons.
s Carry the TV holding the upper and bottom
frames of the TV as illustrated.
s Hold the TV securely when carrying it.

s
As the glass surface of the TV has a special
coating, be careful to avoid touching the glass surface as far as
possible.


s
When transporting, do not subject the unit to shocks or vibration,
or excessive force.

Installation

s
When installing or removing the TV

on the wall, be sure to use qualified

contractors. Wall mount installation

requires the use of a wall-mount

bracket. If the TV is installed or

removed from the wall by a person

other than a qualified contractor, the


unit may fall and cause serious injury if the unit is not installed

securely.
s To prevent injury, this apparatus must be securely attached to the

stand/wall in accordance with the installation instructions.


7
Placement for viewing
It is recommended to watch the TV at a distance of 3 to 7 times that of
the screen height, and in moderate brightness. Watching the TV for too
long or in a dark room will cause eye fatigue.
Optional accessories
Observe the following when installing the TV using a
wall-mount bracket. If the TV is not secured properly,
it may fall and cause injury.
s Be sure to follow the operating instructions
supplied with the wall-mount bracket when
installing the unit.
s Be sure to attach the brackets supplied with the
wall-mount bracket.
Protruding location
Do not install the TV in protruding locations. If you install the unit in the
following locations, injury may result.
s Do not install the unit in a location where the unit protrudes, such
as pillars.
s Do not install the unit in a location that may cause injury.
Oils
Do not install this unit in restaurants where oily vapors occur. Dust
absorbing oil may enter into the unit and damage the unit.
Corrosion
Use of this TV near the seashore may subject the set to excessive salt,
corrosion and internal damage and result in deterioration of the TV’s
performance. If the set will be subjected to these conditions, steps should
be taken to reduce the humidity and temperature of the area where the
TV is located.
Ventilation
The slots and openings in the TV are provided for necessary ventilation.
To ensure reliable operation of the unit, and to protect it from
overheating, these slots and openings must never be blocked or covered.
Unless proper ventilation is provided, the unit may
gather dust and get dirty. For proper ventilation,
observe the following:
s Do not install the unit turned backward or
sideways.
s Do not install the unit turned over or upside
down.
s Never cover the slots and openings with a
cloth or other materials.
s Never block the slots and openings by
placing the unit on a bed, sofa, rug or
other similar surface.
s Never place the unit in a confined space, such
as a bookcase or built-in cabinet, unless
proper ventilation is provided.
s Leave some space around the unit. Otherwise, adequate
air-circulation may be blocked causing overheating and cause fire
or damage the unit.
Outdoor use
Do not install this unit outdoors. If the unit is exposed
to rain, it may result in fire or electric shock. If the unit
is exposed to direct sunlight, the unit may heat up and
cause damage to the unit.
Vehicle and ceiling
Do not install this unit in a vehicle or hang from the
ceiling.
Bumping of the vehicle may cause the unit to fall down
and cause injury.
Ship and vessel
Do not install this unit in a ship or vessel. If the unit is
exposed to seawater, it may cause fire or damage the
unit.
When installing the unit on the wall, allow this much space.
15 cm
(6 inches)
30 cm
(117/8 inches)
10 cm
(4 inches)
10 cm
(4 inches)
When installing the unit using a stand, allow this much space.
30 cm
(117/8 inches)
10 cm
(4 inches)
10 cm
(4 inches)
10 cm (4 inches)
Never install the unit as follows:
Air circulation is blocked. Air circulation is blocked.
(Continued)

Preventing the TV from toppling over

Take measures to prevent the unit from toppling over and causing injury.
To prevent the unit from toppling over, secure the unit to the wall or
pillar.

Installing on a level surface

If you install the unit on a non-level surface, the unit
may fall or drop and cause injury or damage.


Placing on a stable surface

If you place the unit on an unstable surface, the unit
may fall and cause injury or damage.


Fall

Do not hang anything on the unit.
The unit may fall from the stand or wall-mount
bracket, causing damage or serious injury.


AC power cord

Unplug the AC power cord when moving the unit.
Do not move the unit with the AC power cord
plugged in. It may damage the AC power cord and
result in fire or electric shock.
Do not allow anything to rest on or roll over the
power cord, and do not place the unit where the
power cord is subject to wear or abuse.


Antennas

Outdoor Antenna Grounding

If an outdoor antenna is installed, follow the precautions below. An
outdoor antenna system should not be located in the vicinity of overhead
power lines or other electric light or power circuits, or where it can come
in contact with such power lines or circuits.

WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT
WITH THEM IS ALMOST INVARIABLY FATAL.

Be sure the antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in USA and Section
54 of the Canadian Electrical Code in Canada provides information with
respect to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.

Antenna Grounding According to the National
Electrical Code, ANSI/NFPA 70

Antenna lead-in wire
Antenna discharge unit
(NEC Section 810-20)
Grounding conductors
(NEC Section 810-21)
Ground clamps
Power service grounding
electrode system
(NEC Art 250 Part H)
Ground clamps
Electric service
equipment
NEC: National Electrical Code
Lightning

For added protection for this TV during a lightning storm, or when it is
left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna. This will prevent damage to the
receiver due to lightning and power-line surges.

Service

Damage Requiring Service

Do not attempt to service the set by yourself since
opening the cabinet may expose you to dangerous
voltage or other hazards.

Unplug the set from the wall outlet and refer servicing to
qualified service personnel.


Replacement parts

When replacement parts are required, be sure the
service technician certifies in writing that he/she has
used replacement parts specified by the manufacturer
that have the same characteristics as the original parts.

Unauthorized substitutions may result in fire, electric
shock or other hazards.


Safety check

Upon completion of any service or repairs to the unit,
ask the service technician to perform routine safety
checks (as specified by the manufacturer) to
determine that the unit is in safe operating condition,
and to so certify. Ask a qualified service technician to
dispose of the unit.



Contents
Introducing the TV
Welcome .............................................................. 11
Package Contents.......................................... 11
Features......................................................... 11


Installing the TV .................................................. 13
Preventing the TV from Toppling Over .......... 13
Bundling the Connecting Cables.................... 14
Adjusting the Viewing Angle of the TV........... 14


TV Controls and Connectors .............................15
Front Panel .................................................... 15
Side Panel...................................................... 16
Rear Panel.....................................................17


Connecting the TV
Overview.............................................................. 19
Making Video and Audio Connections...........19
About Using S VIDEO.................................... 20
About Using HDMI to DVI Adapter................. 20


Basic Connections ............................................. 21
Cable System or VHF/UHF............................ 21
Cable Box and Antenna................................. 22
Cable Box ...................................................... 23
Satellite Receiver ...........................................24
Digital Cable Box or Digital Satellite
Receiver......................................................... 25
Equipment with HDMI Connection .................26
Equipment with DVI Connection .................... 27
Equipment with Digital Audio (OPTICAL) ...... 28


Using CableCARD Device ..................................29
About Using CableCARD Device................... 29
Activating CableCARD Service...................... 29
Removing the CableCARD Device ................ 30


Setting Up the Channel List............................... 31


Using Initial Setup..........................................31


Connecting Optional Equipment....................... 32
VCR and Cable..............................................33
VCR and Cable Box....................................... 34
Two VCRs for Tape Editing ........................... 36
DVD Player with Component Video
Connectors..................................................... 37


DVD Player with S VIDEO and Audio
Connectors.....................................................38
Personal Computer ........................................39
Camcorder or “PlayStation”............................40
Audio Receiver...............................................40


Watching the TV
Overview ..............................................................41
Inserting Batteries into the Remote Control.....41
Button Descriptions............................................42
Programming the Remote Control ....................44
Using Other Equipment with Your Remote
Control...........................................................46
Special Buttons on the Remote Control ...........48

Using the GUIDE Button ................................48
Using the WIDE Button ..................................50
Using the JUMP Button..................................51
Using the FREEZE Button..............................51
Using the POWER SAVING Button................51


Introducing WEGA GATE
Overview of WEGA GATE...................................52
Navigating and Selecting Items.........................54
Using Favorites in WEGA GATE........................54
Using Cable in WEGA GATE..............................55
Using Antenna in WEGA GATE .........................55
Using External Inputs in WEGA GATE..............56
Using Photo in WEGA GATE..............................56
Using Video in WEGA GATE ..............................56
Using Settings in WEGA GATE..........................56


(Continued)


Using the Photo/Video Viewer Other Information
About USB........................................................... 57
Features......................................................... 57
Connecting the USB Cable ............................58
File Compatibility............................................ 58


Using the Photo/Video Viewer Index ................ 59


Using the Photo/Video Viewer Index ............. 60


Viewing Photos ................................................... 61
Photo Controls ............................................... 61
Photo Menu Bar Options................................ 62
Using Zoom and Pan ..................................... 63
Using Rotate .................................................. 63


Playing Movies.................................................... 64
Movie Controls...............................................64
Movie Menu Bar Options ............................... 65


Photo/Video Viewer Index Menu Bar
Options ......................................................... 66
Slide Show Menu Options.............................. 66
Contents Menu Options ................................. 67
USB Media Menu........................................... 67


Notes on Using USB Media................................ 68


About DCF File Names ..................................68


Using the Settings
Overview.............................................................. 69
Accessing the Video Settings ........................... 71


Selecting Video Options................................. 71
Selecting PC Video Options........................... 73


Accessing the Audio Settings...........................74
Selecting Audio Options................................. 74
Selecting PC Audio Options........................... 76


Accessing the Screen Settings ......................... 77
Selecting Screen Options .............................. 77
Selecting PC Screen Options ........................ 79


Accessing the Channel Settings .......................80


Selecting Channel Options ............................ 80


Accessing the Parental Lock Settings.............. 82
Selecting Parental Lock Options.................... 82
Viewing Blocked Programs............................83
Selecting Custom Rating Options.................. 83


Accessing the Setup Settings ........................... 85
Selecting Setup Options ................................ 85
Programming Caption Vision ......................... 87
Selecting PC Setup Options .......................... 88


Accessing the Applications Settings................ 90


Selecting Applications Options ...................... 90


Overview ..............................................................92
Contacting Sony..................................................92
Troubleshooting..................................................92


Remote Control ..............................................92
CableCARD Device........................................93
Video ..............................................................93
Audio ..............................................................94
Channels ........................................................95
USB................................................................95
General...........................................................97


Specifications......................................................98
Index.....................................................................99



Introducing the TV
Welcome

Thank you for purchasing this Sony LCD digital TV. This manual is for
models KDL-V26XBR1, KDL-V32XBR1 and KDL-V40XBR1.

Package Contents
Along with your new TV, the packing box contains a remote control, and
two AA (R6) batteries. See page 98 for the complete list of packaging
contents.

Features Some of the features that you will enjoy with your new TV include:
s WEGA GATE™: WEGA GATE is a new feature that allows you to
easily navigate to the most convenient TV functions: favorite channels,
cable channels, antenna channels, external input list, viewing photo and
movies or settings.
s WEGA Engine: Delivers superb picture quality from any video source
by minimizing the signal deterioration caused by digital-to-analog
conversion and stabilizing the signal processing. This engine features
unique Sony technology, including:


The first step in the digital processing system, Composite
Component Processor (CCP-X), which enhances input signal-tonoise
ratio by chroma decoder digital processing.

DRC® (Digital Reality Creation)-MF V1: Unlike conventional
line doublers, the DRC Multifunction feature replaces the signal’s
NTSC waveform with the near-HD equivalent by digital mapping
processing. The DRC Palette option lets you customize the level of
detail (Reality) and smoothness (Clarity) to create up to three
custom palettes.
s
Integrated HDTV: You can watch digital television programs and
enjoy the improved audio/video quality offered by these programs.

s
Wide Screen Mode: Watch conventional 4:3 aspect ratio broadcasts in
wide screen (16:9) mode.

s
S-master Full Digital Amplifier: Delivers superb clear dialog and
reproduces the original sound quality while minimizing any sound
fragmentation or jitter noise.

s
CineMotion®: Using the reverse 3-2 pull down technology, the
CineMotion feature provides smoother picture movement when playing
back movies or other video sources on film.

s
Parental Control: V-Chip technology allows parents to block
unsuitable programming from younger viewers.

(Continued)

11

Introducing the TV


Introducing the TV
s CableCARD™ slot: Provides cable subscribers with access to digitally
encrypted cable channels — without the need for a set-top box — that
will enable you to receive not only standard definition but also high
definition television. The CableCARD device, which is provided by
your cable TV company, is inserted into the TV’s rear panel
CableCARD slot. After the service is activated with your cable TV
company, the card replaces the need for a separate set-top box. (Check
with your cable TV company about CableCARD service details,
limitations, pricing, and availability. For more information about
CableCARD device in this manual, see page 29.)
s Component Video Input: Offers the best video quality for DVD (480p
and 480i), and digital set-top box (1080i, 720p, 480p and 480i)
connections.
s Favorite Channels: With the WEGA GATE function, allows you to
navigate a list of up to 16 favorite channels without leaving the current
channel.
s Steady Sound®: Equalizes volume levels so there is consistent output
between programs and commercials.
s HDMI (High-Definition Multimedia Interface): Provides an
uncompressed, all-digital audio/video interface between this TV and
any HDMI-equipped audio/video component, such as a set-top box,
DVD player, and A/V receiver. HDMI supports enhanced, or high-
definition video, plus two-channel digital audio.
s Light Sensor: Allows the picture brightness level to be optimized to
ambient light. The effect from the Light Sensor depends on the setting
of Picture Mode and Power Saving. The factory setting is Off.
s Caption Vision/ Info Banner: Allows Closed Caption and/or Channel
Programming Information to be displayed.


Introducing the TV

Installing the TV


Preventing the TV
from Toppling Over

Attaching the Support Belt

Introducing the TV
1Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).

2Attach the support belt to the stand, and screw the belt with a securing
screw (supplied) using a coin, etc.

3Adjust the length by pulling the support belt towards you while holding
the TV stand.


Be sure to take measures to prevent the TV from toppling over and
causing injury.

If the supplied wood screw does not fit depending on the type of
TV stand, or when the securing strength is not enough, prepare
commercial screws (3 to 4 mm (1/8 to 3/16 inches) diameter) to fit
to the TV stand. Consult your dealer about the types of screw.

When Mounting on a Wall

Be sure to use the following optional wall-mount brackets to hang the TV on
the wall.
KDL-V26XBR1/KDL-V32XBR1: SU-WL31
KDL-V40XBR1: SU-PW2
See the Instruction Guide supplied with the wall-mount bracket on how to
mount the TV on the wall.

13



Introducing the TV
Bundling the
Connecting Cables
After the connections are done, organize the cables as illustrated below.
1 Attach the cable holder (supplied) to the rear of the TV (A), then turn
the cable holder a quarter turn to the left (B).
2 Push the clasp lever in to release the lock and open the cover, and then
insert the cables.
3 Close the cover until it clicks shut and locks.

B1A23
Adjusting the This TV can be adjusted within the angles shown below.
Viewing Angle of the Adjust the angle back and forth Adjust the angle left and right
TV (tilt) (KDL-V26/32XBR1 only) (swivel)


3° 8°

Right view


Top view

15° 15°

15° 15°

Front

Front


When adjusting the angle, hold the stand with one
hand to avoid slipping or tipping the stand.



Introducing the TV

TV Controls and Connectors
Front Panel

5OFF TIMER POWER/STANDBY
123
4


Item Description
1
PIC OFF LED When lit, indicates that the Picture Off feature is activated. For details, see page 86.
2
TIMER LED When lit, indicates one of the timers or Sleep is set. When it is set, this LED will remain lit
even if the TV is turned off. For details, see page 90.
3
POWER/
STANDBY LED
Lights up in green when the TV is turned on. The LED lights up red when in standby mode for
both TV and PC input. The standby mode for PC input is set by setting Power Management
to On in the PC Setup settings. If the LED blinks in red continuously, this may indicate the TV
needs servicing (see “Contacting Sony” on page 2).
4
5
(IR) Infrared
Receiver/Light
Sensor
Speaker
Receives IR signals from the remote control.
Senses room light level and adjusts the screen brightness accordingly (for details, see page 86).
Do not put anything near the sensor, as its function may be affected.
Outputs audio signal.

Introducing the TV

15



Introducing the TV

Side Panel

Right side

Left side

(1080i/720p/480p/480i) VIDEO/HD/DVD IN 2
5

1



6

2


WEGA
7


3


8
9

4


CHANNEL
POWER
VOLUME
TV/VIDEO
GATE
Item Description
1
USB jack Connects to the USB port on your USB device. Provides a secure digital connection between
your TV and USB device, such as digital video camcorders and digital cameras.

2
VIDEO/HD/DVD Connect to your component video (YPBPR) and audio (L/R) output jacks of your DVD player
2 IN or digital TV receiver.
Y PB/CB PR/CR Component video provides better picture quality than the composite video (3) connection.

3
VIDEO/HD/DVD Connect to the composite video and audio output jacks on your camcorder or other video
2 IN equipment. When Auto is selected for the Video 2 (Component) option in the Setup
VIDEO/(MONO) settings, the component video function will be preferentially activated (see page 86).
L-AUDIO-R

4
Headphones Connects to your headphones. If your headphones do not match the jack, use a suitable plug
jack adaptor (not supplied).
5
POWER Press to turn on and off the TV.
6
V v
+ CHANNEL –
Press to scan through channels. To scan quickly through channels, press and hold down either
+ or –. On the WEGA GATE screen, these buttons serve as up/down buttons.
7
8
9
b B
+ VOLUME –
/TV/VIDEO
WEGA GATE
Press to adjust the volume. On the WEGA GATE screen, these buttons serve as right/left
buttons.
Press to confirm the selection or setting in WEGA GATE.
Press repeatedly to cycle through the video equipment connected to the TV’s video inputs.
Press to display WEGA GATE. Press again to exit WEGA GATE.
16
The CHANNEL + button has a tactile dot. Use the tactile dot as a reference
when operating the TV.


Introducing the TV

Rear Panel


Introducing the TV
R AUDIO IN L
S VIDEO
AUDIO
VIDEO IN HD/DVD IN
(1080i/720p/480p/480i)
UDIO OUT
(VAR/FIX)
R
UDIO
Y
PB/CB
R
6
3
OPTICAL
OUT
AC IN AC IN
12456309qa87KDL-V26XBR1
KDL-V32XBR1
KDL-V40XBR1
(Continued)

17


Introducing the TV

Jack Description
1
HDMI 6 IN HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
HDMI/ audio/video interface between this TV and any HDMI-equipped audio/video component, such
R-AUDIO IN-L as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition

video, plus two-channel digital audio.
The AUDIO IN (L/R) of HDMI IN is for DVI connection. For details, see page 27.


2
VIDEO 1 IN Connects to the S VIDEO output jack of your VCR or other video equipment that has
S VIDEO S VIDEO. S VIDEO provides better picture quality than the composite video (3) connection.

3
VIDEO 1/3 IN Connect to the composite video and audio output jacks on your VCR or other video
VIDEO/ component. A third composite video and audio (VIDEO/HD/DVD 2 IN) is located on the left
L (MONO)-side panel of the TV.
AUDIO-R

4
HD/DVD 4/5 IN Connect to your DVD player’s or digital set-top box’s component video (YPBPR) and audio
(1080i/720p/ (L/R) jacks.
480p/480i)/ Component video provides better picture quality than the S VIDEO (2) or the composite
L-AUDIO-R video (3) connections.

5
OPTICAL OUT Connects to the optical audio input of a digital audio component that is PCM/Dolby Digital
(PCM/DOLBY * compatible.
DIGITAL)

6
AUDIO OUT Connect to the left and right audio input jacks of your audio or video equipment. You can use
(VAR/FIX) these outputs to listen to your TV’s audio through your stereo system.

7
PC 7 IN Connects to personal computer’s video and audio output connectors.
(AUDIO/RGB) Can be connected to other Analog RGB devices such as Video Conferencing or Set-top Boxes.
See “PC Input Signal Reference Chart” on page 89 for the signal to be displayed.

8
CableCARD slot
CableCARD device provides cable subscribers with access to secure, digitally encrypted cable
channels — without the need for a set-top box — that will enable you to receive not only
standard definition but also high definition television. For details, see page 29.

9
AC IN Connects the supplied AC power cord.

0
CABLE RF input that connects to your cable signal.

qa
VHF/UHF RF input that connects to your VHF/UHF antenna.

* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.

Connecting the TV
Overview
Your new LCD TV can receive both analog and digital (HD and SD)
broadcasting signals from antenna, satellite and cable TV company.
To display clear crisp pictures, you must connect your TV correctly and
choose the correct display format (see “Using the WIDE Button” on page
50). It is strongly recommended to connect the cable and antenna inputs
using a 75-ohm coaxial cable to receive optimum picture quality signal. A
300-ohm twin lead cable can be easily affected by radio noise and the like,
resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep
it as far away as possible from the TV.
Making Video and
Audio Connections
The signals that enter your TV and connected devices will need to output in
the correct format using the suitable connections. Below are different types
of video connectors available these days. Your TV comes with all types of
connectors with the exception of the DVI connector but your cable box or
satellite receiver may be equipped with this type. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as to below.

Best Video
Performance


Connector type
Separate audio
connection required
HDMI
(High-Definition Multimedia Interface)
No
DVI (Digital Visual Interface) *
Yes
L-AUDIO-R
Y PB/CB PR/CR
Component video
(480i/480p/720p/1080i)
S VIDEO
Composite video
RF/Coaxial No

*An adapter is necessary when you are connecting a DVI-equipped device to this TV
(see page 20).

Connecting the TV

19



Connecting the TV

About Using S
VIDEO


If the optional equipment you are connecting has an S VIDEO jack
(shown at left), you can use an S VIDEO cable for improved picture
quality (compared to an A/V cable). Because S VIDEO carries only
the video signal, you also need to connect audio cables for sound, as
shown below.

Example of an S VIDEO Connection
Rear of TV

S VIDEO
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 3
Audio cable
S VIDEO
cable
Equipment with S VIDEO
S VIDEO
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.


About Using HDMI If you are connecting equipment with DVI connector to this TV, you will
to DVI Adapter need to use an adapter. You can use an HDMI-to-DVI cable or an HDMI
adapter (not supplied). Both are available at your local electronics store.
When you use the adapter, you will also need to use separate audio cables
for sound as DVI connector is for video signals only.


HDMI-to-DVI Cable


HDMI adapter Audio cable


Connecting the TV

Basic Connections

The way in which you connect your TV will vary, depending on how your
home receives a signal (antenna and satellite; cable and cable box) and
whether or not you plan to connect a VCR.

If You Are Connecting... See Page
Cable System or VHF/UHF
21

.
No cable box or VCR
Cable Box and Antenna
22

.
Cable box unscrambles only some
channels (usually premium channels)
.
No VCR
Cable Box
23

.
Cable box unscrambles all channels
.
No VCR
Connecting the TV

Satellite Receiver 24
Digital Cable Box or Digital Satellite Receiver 25
Equipment with HDMI Connection 26
Equipment with DVI Connection 27
Equipment with Digital Audio (OPTICAL) 28

Cable System or
VHF/UHF

If you are connecting a VCR

s See the connection described on pages 33 and 34.

For best results, use this connection if:

s You have a cable and/or an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable TV company.)
s You do not have a cable box or VCR. (If you have a cable box, see
pages 22 and 23. If you have a VCR, see pages 33 and 34.)

Antenna System
Cable Type Connect As Shown

Cable TV (CATV)
and Antenna

Antenna cable CATV cable
Notes on Using This Connection

To Do This... Do This ...
Switch the TV’s input between Press ANT to switch back and forth between the TV’s VHF/UHF and CABLE inputs.
the cable and antenna


Do not use an indoor antenna, which is especially susceptible to radio noise.

21


Connecting the TV

Cable Box and For best results, use this connection if:
Antenna s Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
Before connecting a all channels.
cable box, see “ Using

s
You do not have a VCR. (If you have a VCR, see pages 33 and 34.)

CableCARD Device” on
page 29.


With this connection you can:

s
Use the TV’s remote control to change channels coming through the
cable box to the TV’s CABLE input jack. (You must first program the
remote control for your specific cable box; see “Programming the
Remote Control” on page 44.)

s
Use the TV’s remote control to change channels coming directly into
the TV’s VHF/UHF input jack.

CATV cable

Antenna cable

IN OUT
CABLE
Rear of TV
Cable box
Coaxial
cable
Notes on Using This Connection

To Do This ... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.

Set up the TV remote control to operate the cable Program the remote control. See “Programming the Remote
box Control” on page 44.

Activate the remote control to operate the cable Press SAT/CABLE (FUNCTION).
box

Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
channel that the cable box is set to (usually channel 3 or 4).

Switch the TV’s input between the cable box and Press ANT to switch back and forth between the TV’s VHF/UHF
antenna (scrambled channels) and CABLE (unscrambled) inputs.


Connecting the TV

Cable Box For best results, use this connection if:
s Your cable company scrambles all channels, which requires you to use a
Before connecting a cable box.
cable box, see “ Using
CableCARD Device” on
s You do not have a VCR. (If you have a VCR, see pages 33 and 34.)
page 29.
With this connection you can:
s Use the TV’s remote control to change channels coming through the
cable box to the TV’s VHF/UHF input jack. (You must first program the
remote control for your specific cable box.)
To connect the cable box
1 Connect the CATV cable to the cable box’s input jack.
2 Use a coaxial cable to connect the cable box’s output jack to the TV’s
VHF/UHF input jack.
3 Run Auto Program, as described in “Setting Up the Channel List” on
page 31.

VHF/UHFCATV cable Coaxial cable
OUTIN
Cable box


Rear of TV

Notes on Using This Connection

To do this... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.

Set up the TV remote control to operate the cable Program the remote control. See “Programming the Remote
box Control” on page 44.

Activate the remote control to operate the cable Press SAT/CABLE (FUNCTION).
box

Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
channel that the cable box is set to (usually channel 3 or 4).

Connecting the TV

23



Connecting the TV
Satellite Receiver Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2 Use A/V and S VIDEO cables to connect the satellite receiver’s AUDIO
and S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.
3 Use a coaxial cable to connect your cable to the TV’s CABLE jack, or
your antenna to the TV’s VHF/UHF jack.

Rear of TV

S VIDEO

CABLE
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 3
Satellite receiver
A/V cable
Satellite
antenna
cable
S VIDEO cable
VIDEO
AUDIO-L
AUDIO-R
Cables are often
color-coded to connectors.
Connect red to red,
w hite to w hite, etc.
Coaxial cable
If your satellite receiver is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.


Connecting the TV
25
Connecting the TV
Digital Cable Box
or Digital Satellite
Receiver
Disconnect all power sources before making any connections.
1 Connect the RF coaxial cable from the CATV or satellite dish to the
input of the digital cable box or digital satellite receiver.
2 Use a component video cable to connect the YPBPR jacks of your
digital cable box or digital satellite receiver to the TV’s component
jacks.
3 Use an audio cable to connect the AUDIO OUT jack of the digital cable
box or digital satellite receiver to the TV’s AUDIO IN jacks.
Component video (Y PB/CB PR/CR) connection is necessary to view
digital broadcastings in 1080i, 720p, 480i and 480p. This TV
displays all format types of picture in a resolution of 1,366 dots ×
768 lines.
The component Jacks (Y PB/CB PR/CR) do not provide audio, so
audio cables must be connected to provide sound.
HD/DVD IN
(1080i/720p/480p/480i)
AUDIO OUT
(VAR/FIX)
AUDIO
L
Y
PB/CB
PR/CR
R
4 5
OPTICAL
OUT
Rear of TV
Y
PB/CB
PR/CR
AUDIO-L
AUDIO-R
Audio cable
Digital cable box or Satellite receiver
Component video cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
RF coaxial cable

Connecting the TV

Equipment with
HDMI Connection

z
The HDMI jack provides
both video and audio
signals, so it is not
necessary to connect
the audio cable.

For best results, use this connection if:

s Your equipment has a High-Definition Multimedia Interface (HDMI).

Disconnect all power sources before making any connections

Use an HDMI cable, connect the equipment’s HDMI OUT jack to the TV’s
HDMI IN jack.

HDMI cable

R AUDIO IN L
HD/DVD IN
(1080i/720p/480p/480i)
AUDIO OUT
(VAR/FIX)
AUDIO
L
Y
PB/CB
PR/CR
R
4
6
5
OPTICAL
OUT
S VIDEO
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 3
Rear of TV
Equipment with HDMI output

Connecting the TV

Equipment with DVI Disconnect all power sources before making any connections
Connection If you are connecting with DVI-HDTV output, you can connect to the TV’s
HDMI IN jack by using an HDMI-to-DVI cable or an adaptor.

HDMI-to-DVI cable or adapter

R AUDIO IN L
HD/DVD IN
(1080i/720p/480p/480i)
AUDIO OUT
(VAR/FIX)
AUDIO
L
Y
PB/CB
PR/CR
R
4 5
OPTICAL
OUT
S VIDEO
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 3
6
Rear of TV
Audio cable
Equipment with DVI output
AUDIO-R
AUDIO-L
Cables are often
color-coded to connectors.
Connect red to red,
w hite to w hite, etc.
When using an HDMI-to-DVI cable or an adapter, be sure to

connect the DVI output connector first; then connect to the HDMI
input on your TV.

Connecting the TV

27



Connecting the TV

Equipment with
Digital Audio
(OPTICAL)

Disconnect all power sources before making any connections.

You can use the TV's OPTICAL OUT jack to connect a digital audio device
that is PCM/Dolby digital compatible, such as an audio amplifier.

Use an optical audio cable to connect the TV’s OPTICAL OUT jack to the
device’s OPTICAL IN jack.

Rear of TV

HD/D
(1080i/720p/480p/480i)
AUDIO
L
Y
PB/CB
PR/C
R
4 5
OPTICAL
OUT
OPTICAL
IN
LINE
OUT
L AUDIO R
LINE
IN
Optical audio cable
Audio amplifier
The OPTICAL OUT jack is
available only when a
digital TV channel is
received.


Connecting the TV

Using CableCARD Device

CableCARD device provides cable subscribers with access to digitally
encrypted cable channels — without the need for a set-top box — that will
enable you to receive not only standard definition but also high definition
television. The CableCARD device, which is provided by your cable TV
company, is inserted into the TV’s rear panel CableCARD slot. After the
service is activated with your cable TV company, the card replaces the need
for a separate set-top box.

About Using If you are planning to use a separate cable box for digital cable TV services,

CableCARD Device you may be able to receive programming using this TV with the
CableCARD device instead — except in the following circumstances:
s Your cable TV company does not provide CableCARD service in your
viewing area.

s
You want to access your cable TV company’s interactive or advanced
features (such as video-on-demand or, in some cases, pay-per-view). At
this time, these services require a bidirectional link, which are only
available through the use of a separate set-top box. The CableCARD
device is currently a unidirectional device only, and cannot provide
these advanced services.

Check with your cable TV company for CableCARD service details,

limitations, pricing, and availability, all of which are determined by your

cable TV company — not Sony.

Activating Before you can use CableCARD service, you need to insert the CableCARD
CableCARD Service device (supplied by your cable TV company) and activate the service, as
described below:
1 Remove the cover and insert the CableCARD device into the TV’s
CableCARD slot.

AUDIO RGBPC IN 7
Connecting the TV

(Continued)

29


Connecting the TV


CAUTION: Inserting the CableCARD device incorrectly may result
in permanent damage to the card and the TV.
2
Gently push the card into the slot until it locks into place, and then
reattach the cover.

z
You can also access 3 After 1-2 minutes, the CableCARD device setup screen is automatically
information about your

displayed. This screen includes information your cable TV company

CableCARD device in

will request before they can activate your service.

the Applications
settings (see page 91). 4 Follow the displayed instructions: Phone your cable TV company. A

representative will guide you through the activation process.

5
After your CableCARD device is activated, your cable TV company
will download the service information, including the channel list, to the
CableCARD device. After the CableCARD device has acquired
channels from your cable TV company, the TV tunes to the lowest
available channel.

Removing the In the event you want to cancel your service, contact your cable TV
CableCARD Device company.


Once the CableCARD device is removed, your TV will no longer
decrypt digital cable TV programming services that require
CableCARD device.
1
Push the eject button on the TV’s CableCARD slot to release the card.

AUDIO RGBPC IN 7
CableCARD
Eject button
2 Pull the CableCARD device straight out of the slot to remove it.
To install a different CableCARD device, follow the instructions in
“Activating CableCARD Service” on page 29.


Connecting the TV

Setting Up the Channel List

After you finish connecting the TV, you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen appears
when you turn on the TV for the first time after hooking it up. If you choose
to set up the channels at a later time, select the Auto Program option in the
Channel setting to scan available channels (see below).


The Initial Setup feature does not apply for installations that use a
cable box for all channel selection.
Using Initial Setup
To run Initial Setup the first time you turn on your TV
1 Press

TV POWER
to turn on the TV.
The Initial Setup screen appears.
2 Press V or v to highlight the on-screen
display language. Then press


. The

message “First please connect cable

and/or antenna.” appears. This may

require 50+ minutes for completion and

“Start auto program now?” appears.

3

A p will automatically create a
l antenna and cable TV
ch

 
minutes) to complete. A

progress bar is displayed while available channels are being

scanned. If you cancel the Auto Program before all receivable

channels are scanned, you may want to perform the task later (see

“To run Auto Program at a later time” below).


If you selected “No” during the Initial Setup, the Initial Setup
message will appear each time you turn on the TV until you
complete the Auto Program as a reminder.
To run Auto Program at a later time
1 Select Settings in WEGA GATE, and then go to Channel settings.
2 Select Auto Program then select Start.



Auto Program will create a list of receivable channels for the
current input (VHF/UHF antenna or CABLE). You will be required to
run Auto Program for each RF input to create a list of available
channels from both inputs.
.
Connecting the TV

31



Connecting the TV

Connecting Optional Equipment

You can connect a variety of optional equipment to your TV. This section
provides some of the individual connections you can make. For multiple
connections, please refer to the Quick Setup Guide.

If You Are Connecting... See Page
VCR and Cable 33
VCR and Cable Box 34
Two VCRs for Tape Editing 36
DVD Player with Component Video Connectors 37
DVD Player with S VIDEO and Audio Connectors 38
Personal Computer 39
Camcorder or “PlayStation” 40
Audio Receiver 40


Connecting the TV

VCR and Cable For best results, use this connection if:

s You have cable TV that does not require a cable box.

Disconnect all power sources before making any connections.
1 Connect the CATV cable to the single (input) jack of the splitter.
2 Use a coaxial cable to connect one of the output jacks of the splitter to

the TV’s CABLE input jack.
3 Use a coaxial cable to connect the splitter’s other output jack to the
VCR’s input jack.
4 Use A/V and S VIDEO cables to connect the VCR’s AUDIO and
S VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.

CABLE
S VIDEO
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 Coaxial cable
Rear of TV
VIDEO
CATV Cable
VCR
A/V cable
S VIDEO
S VIDEO cable
Coaxial cable
AUDIO-L
AUDIO-R
Splitter
Cables are often
color-coded to connectors.
Connect red to red,
w hite to w hite, etc.
If your VCR is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.

Connecting the TV

33



Connecting the TV

VCR and Cable Box For best results, use this connection if:

s
Your cable TV company scrambles some channels, but not all of them

Before connecting a (pay channels vs. regular cable channels) and you need to use a cable
cable box, see “ Using

box.

CableCARD Device” on
page 29.


With this connection you can:

s
Use the TV’s remote control to change channels on your cable box
when the signal is scrambled. To program your Sony remote control to
operate your cable box, see “Programming the Remote Control” on
page 44.

s
Use the TV’s remote control to change channels on your TV when the
signal is not scrambled. Your TV’s tuner provides a better signal than
the cable box.

Disconnect all power sources before making any connections.

1
Connect the CATV cable to the single (input) jack of the splitter.

2
Use a coaxial cable to connect one of the output jacks of the splitter to
the TV’s CABLE input jack.

3
Use a coaxial cable to connect the splitter’s other output jack to the
cable box’s input jack.

4
Use a coaxial cable to connect the cable box’s output jack to the VCR’s
RF input jack.

5
Use an A/V cable to connect the cable box’s A/V output jacks to the
TV’s A/V input jacks.

6
Use A/V and S VIDEO cables to connect the VCR’s AUDIO and S
VIDEO OUT jacks to the TV’s AUDIO and S VIDEO IN jacks.


If your VCR is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
7
Run Initial Setup, as described in “Setting Up the Channel List” on page

31.

Connecting the TV

CABLE
S VIDEO
VIDEO IN
1 3
Cable box
VCR
Rear of
TV
A/V cable
Coaxial
cable
S VIDEO
cable
CATV
cable
Coaxial cable
Splitter
If you are connecting a
digital cable box, you w ill
need a special bi-
directional splitter
designed to w ork w ith
your cable box.
Coaxial cable
AUDIO-R
AUDIO-L
VIDEO
Cables are often
color-coded to connectors.
Connect red to red,
w hite to w hite, etc.
A/V cable
Connecting the TV

35



Connecting the TV

Two VCRs for Tape
Editing


Using
S VIDEO jacks?
See page 20.


Cables are often

If you connect two VCRs, you can record from one VCR to the other while
using your TV to monitor what is being recorded.

Disconnect all power sources before making any connections.

1
Use A/V cables to connect the playback VCR’s A/V output jacks to the
recording VCR’s A/V input jacks.

2
Use A/V cables to connect the recording VCR’s A/V output jacks to the
TV’s A/V input jacks.

S VIDEO
VIDEO
AUDIO
VIDEO IN
L
(MONO)
R
1 3
Rear of TV
VCR (playback) VCR (recording)
AUDIO-R
AUDIO-L
VIDEO
color-coded to connectors.
Connect red to red,
w hite to w hite, etc.
A/V cable
A/V cable


To perform tape editing, set the TV to the video input intended for
playback by pressing TV/VIDEO on the remote control.

You may need to change the video input on your VCR. Consult
your VCR’s operating manual for instructions.

If your VCRs have S VIDEO jacks: For best picture quality, use an
S VIDEO connection instead of the video cable (yellow) on your
combined A/V cable.
Use an S VIDEO cable to connect the playback VCR’s S VIDEO OUT
jack to the recording VCR’s S VIDEO IN jack. S VIDEO does not
provide audio, so audio cables must be connected to provide
sound.


You cannot record signals from equipment connected to the
Y PB/CB PR/CR input.

Connecting the TV

DVD Player with
Component
Video Connectors
For best results, use this connection if:
s Your DVD player has component (YPBPR) jacks.
Disconnect all power sources before making any connections.
1 Use a component video cable to connect the DVD player’s YPBPR jacks
to the TV’s Y PB/CB PR/CR jacks. Use the HD/DVD 4/5 IN or
VIDEO/HD/DVD 2 IN Y PB/CB PR/CR input.
The YPBPR jacks on your DVD player are sometimes labeled
YCBCR, or Y, B-Y and R-Y. If so, connect the cables to like colors.
2 Use an audio cable to connect the DVD player’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks. Be sure to use the same row of inputs that
you used for the video connection (HD/DVD 4/5 IN or
VIDEO/HD/DVD 2 IN Y PB/CB PR/CR).

HD/DVD IN
(1080i/720p/480p/480i)
AUDIO OUT
(VAR/FIX)
AUDIO
L
Y
PB/CB
PR/CR
R
5
OPTICAL
OUT
Component video cable
Rear of TV
Audio cable
DVD player
AUDIO-L
AUDIO-R
Y
Cables are often
color-coded to connectors.
Connect red to red,
w hite to w hite, etc.
PB/CB
PR/CR
Connecting the TV


To take advantage of the Wide Mode feature on your TV, set the
DVD player’s aspect ratio to 16:9. For details, refer to the operating
instructions supplied with your DVD player.

37



Connecting the TV

DVD Player with For best results, use this connection if:
S VIDEO and Audio s Your DVD player does not have component (YPBPR) jacks.
Connectors


Disconnect all power sources before making any connections.

1
Use an A/V cable to connect the DVD player’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks.

2
Use an S VIDEO cable to connect the DVD player’s S VIDEO OUT
jack to the TV’s S VIDEO IN jack.

Rear of TV

DVD player
A/V cable
S VIDEO cable
S VIDEO
AUDIO-R
VIDEO
AUDIO-L
Cables are often
color-coded to connectors.
Connect red to red, white
to white, etc.


If your DVD player is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.

To watch the DVD, press TV/VIDEO repeatedly to select the
DVD input (VIDEO 1 in the illustration). If you have a non-Sony
DVD player, and want to set up the TV remote control to
operate the DVD player you must program the remote control.
See “Programming the Remote Control” on page 44.

To control DVD functions with the TV remote control, see
“Operating a DVD Player or DVD Changer” on page 46.

To easily identify equipment connected to the TV, see the
instructions for setting up Label Video Inputs on page 85.



Personal Computer


z
When connecting to an
Apple Macintosh
computer, use the
supplied HD15-HD15
cable to connect PC IN
of the TV to video
output connector of the
computer. For some
Apple Macintosh
computers, it may be
necessary to use an
adapter (not supplied).
If this is the case,
connect the adapter to
the computer before
connecting the HD15HD15
cable.

z
If the picture is noisy,
flickering or not clear,
adjust the Phase and
Pitch in the PC Screen
settings on page 79.

Connecting the TV

To connect a PC (personal computer)

If you connect your PC to the TV, you can watch your personal computer’s
display on the TV.
When your PC is connected to the TV with the HD15-HD15 cable and
optional audio cable, you can view and listen to the PC’s video and audio
output on the TV.

Rear of TV

Connecting the TV
AUDIO RGB
PC IN 7
leCARD
HD15-HD15 cable
(analog RGB)
Audio cable
(stereo mini
plugs)
To monitor port
(15-pin D-Sub)
To audio output jack
To PC IN (RGB) jack To PC IN
(AUDIO) jack
Cable
holder
Slacken
the cable
If the audio cable is unstable, use the supplied cable holder to
secure the cable as illustrated.

39



Connecting the TV

Camcorder or Disconnect all power sources before making any connections.
“PlayStation” For easy connection to a camcorder or “PlayStation,” the TV has left side
audio and video inputs (shown below). Select Off in the Video 2
(Component) option in the Setup settings (see page 86). Use an A/V cable
to connect the camcorder or “PlayStation” A/V output jacks to the TV’s A/V
input jacks.
If you have a mono camcorder, connect its audio output jack to the
TV’s L (MONO) audio input jack.
Left of TV Camcorder “PlayStation”

VIDEO(1080i/720p/480p/480i) VIDEO/HD/DVD IN
PR/CR PB/CB Y
2
AUDIO L(MONO)R
VIDEO
To A/V output
AUDIO-L
AUDIO-R
A/V cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc. or
Audio Receiver
For improved sound quality, you may want to play the TV’s audio through
your stereo system (see page 75).

Disconnect all power sources before making any connections.

Use an audio cable to connect the TV’s AUDIO OUT (VAR/FIX) jacks to
the audio receiver’s audio LINE IN jacks.


AUDIO OUT jacks are operable only when the TV’s Speaker is set
to Off.

HD/DVD IN
(1080i/720p/480p/480i)
AUDIO
L
Y
PB/CB
PR/CR
R
4 5
OPTICAL
OUT
Rear of TV
AUDIO-RAUDIO-L
Audio cable
Line input
Audio receiver
Cables are often
color-coded to connectors.
Connect red to red,
white to w hite, etc.

Watching the TV
Overview

The table on the next page describes the buttons on the remote control.

Topic See Page
Inserting Batteries into the Remote Control 41
Button Descriptions 42
Programming the Remote Control 44
Manufacturer’s Codes 45
Using Other Equipment with Your Remote Control 46
Special Buttons on the Remote Control 48

Inserting Batteries into the Remote Control

Insert two size AA (R6) batteries (supplied) by matching the e and E on
the batteries to the diagram inside the battery compartment.

1 2
To avoid possible damage from battery leakage, remove the
batteries if you anticipate the remote control will not be used for an
extended period.

Handle the remote control with care. Avoid dropping it, getting it
wet, or placing it in direct sunlight, near a heater, or in high
humidity.

Your remote control can be programmed to operate most video
equipment. (See “Programming the Remote Control” on page 44.)

Watching the TV

41



Watching the TV

Button Descriptions

Button Description
TV/VIDEOMUTING
DVD/
VCR
SAT/
CABLE
FUNCTION
TVDVR
POWER TV POWER
JUMP ANT MTS/SAP FREEZE
SOUND PICTURE TV/SAT
SUR
WIDE
WEGA
VISUAL SEARCH PAUSE
PLAY
STOP
REC REC PAUSE REC STOP
MENUTOP MENU F1 F2
POWER SAVING
GUIDEDISPLAY
REPLAY ADVANCE NEXTPREV
GATE
TV
CHVOL
zThe 5 button, CH + button,
MTS/SAP button and PLAY
button have a tactile dot.
Use the tactile dot as a
reference when operating
the TV.
1
MUTING
2
TV/VIDEO
3
FUNCTION
Buttons
4
0-9, ENT
Press to mute the sound. Press again or press VOL + to unmute.
Press to cycle through the video equipment connected to your TV’s
video inputs.
The FUNCTION button indicator lights up momentarily when
pressed to show which external equipment the remote control is
operating. When the remote control is set to operate the external
equipment, these buttons will operate the equipment you choose.
You must first press one of these FUNCTION buttons to operate
the corresponding equipment. For details, see “Programming the
Remote Control” on page 44.
Press 0-9 to select a channel: the channel changes after 2 seconds.
Press ENT to change channels immediately.
5
Use with 0-9 and ENT buttons to select digital channels
(for example, 2.1).
6
JUMP Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel that was
selected.
7
ANT Press to change between the VHF/UHF input and the CABLE
input.
8
SOUND Press to cycle through different sound settings: Dynamic for
enhance treble and bass, Standard for spoken dialog and Custom
for flat setting.
9
PICTURE Press repeatedly to cycle through the available video picture
modes: Vivid, Standard, Custom. The video picture modes can be
also accessed in the Video settings. For details, see “Selecting
Video Options” on page 71.
0
GUIDE Press to display the TV’s program guide.
qa
RETURN Press to return to normal viewing.

qs
DVD/VCR
Operating
Buttons

When FUNCTION is switched on DVR or DVD/VCR, these
buttons operate the video equipment you have programmed into the
remote control. For details, see “Using Other Equipment with Your
Remote Control” on page 46.
. PREV: Press to replay the current program from the previous
Chapter Mark (if any) or from the beginning of the live TV cache.
REPLAY: Press to replay the current program for a set period
of time.


ADVANCE: Press to advance forward a set period of time
when playing back a recorded program.
> NEXT: Press to advance forward to the next Chapter Mark (if
any) or to live TV when playing back a recorded program.
m (fast reverse): Press to play a program in fast rewind mode.
H PLAY: Press to play a program at a normal speed.
M (fast forward): Press to play a program in fast forward mode.
X PAUSE: Press to pause playback.
x STOP: Press to stop the playback of a recorded program.
qd
VISUAL
SEARCH
To be used only with your connected external equipment with
visual search function. (Non-operable button for TV)
qf
VOL +/– Press to adjust the volume.


Watching the TV

Button Description
qg
DVD/VCR z REC: Press to record. By pressing this button alone will start
Record the recording.
X REC PAUSE: Press to pause the recording.

Buttons

x REC STOP: Press to stop the recording.

qh
TOP MENU Press to display the disc menu from your connected DVD player.
qj
MENU Press to display the disc menu from your connected DVD player.
qk
POWER Press to reduce the power consumption.

SAVING

ql
POWER Press to turn on/off the external equipment selected from the
(GREEN) FUNCTION buttons 3.

w;
TV POWER Press to turn on/off the TV.

wa
MTS/SAP
Press repeatedly to cycle through the Multi-channel TV Sound
(MTS) options: Stereo, Auto SAP (Second Audio Program), and
Mono. The MTS setting can be also accessed in the Audio setting.
For details, see “Selecting Audio Options” on page 74.

ws
FREEZE
Press to freeze the current picture in a separate window. Press again
to restore the picture. For details, see “Using the FREEZE Button”
on page 51.

wd
TV/SAT/SUR
TV/SAT: While in SAT/CABLE (FUNCTION), press to switch
between the satellite receiver and antenna.
SUR: Press SUR (Surround Sound) repeatedly to step through the
available audio effect models: TruSurround XT, Simulated,
Off.

wf
WIDE
Press repeatedly to step through the Wide screen mode setting:
Wide Zoom, Normal, Full and Zoom. The Wide screen mode
setting can be also accessed in the Screen setting. For details, see
“Using the WIDE Button” on page 50.

wg
DISPLAY
Press once to display channel number, label, current time and other
information. Press again to turn Display off. See page 90 for details
on setting the time.

wh
V/v/B/b Press V/v/B/b to move the on-screen cursor. To select an item,
press


.


wj
TOOLS To be used only with your connected external equipment that
supports this TOOLS function. (Non-operable button for TV)

wk
WEGA GATE
Press to access the following through WEGA GATE:


Select channels from the Favorites Channels you stored (see
page 54).

Watch TV (see page 55).

View signals from external equipment such as DVD, VCR and
others (see page 56).

View still images or movies from USB device (see page 56).

Adjust or customize TV settings (see page 56).
wl
CH +/– Press to scan through channels. To scan quickly through channels,
press and hold down either +/– button.
e;
F1/F2 Press to select the function of connected components. For details,
see “Using Other Equipment with Your Remote Control” on page
46.

Watching the TV

43



RETURNTOOLS
TV/VIDEOMUTING
/
POWER TV POWER
SOUND PICTURE TV/SAT
SUR
WIDE
WEGA
VISUAL SEARCH PAUSE
PLAY
STOP
CHVOL
REC REC PAUSE REC STOP
MENUTOP MENU F1 F2
POWER SAVING
GUIDEDISPLAY
REPLAY ADVANCE NEXTPREV
GATE
TV
RETURNTOOLS
TV/VIDEOMUTING
/
POWER TV POWER
SOUND PICTURE TV/SAT
SUR
WIDE
WEGA
VISUAL SEARCH PAUSE
PLAY
STOP
CHVOL
REC REC PAUSE REC STOP
MENUTOP MENU F1 F2
POWER SAVING
GUIDEDISPLAY
REPLAY ADVANCE NEXTPREV
GATE
TV
Watching the TV

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

Sony Equipment Programmable Code Number
DVR 772
DVD/VCR 601 (Sony Dream System)
SAT/CABLE 801 (Sony Satellite Receiver)

1
Follow the steps below to program your TV’s remote control to operate the
other video equipment.

Find the three-digit code for your equipment from the “Manufacturer’s

2


Codes” listed on page 45. If more than one code number is listed, try
entering from the code listed first.

3


DVD/ SAT/
DVR VCR CABLE

1
Press and hold the

,

or

FUNCTION button you want to
program on the remote control and press the DISPLAY button
simultaneously.
1
The selected FUNCTION button (DVR, DVD/VCR or SAT/CABLE)
will flash.

2
Enter the three-digit manufacturer’s code number using the --9
buttons while the button is lit. If code is not entered within 10 seconds,
you must perform the step 1 again.

3
Press the


button.

When the programming is correct, the selected FUNCTION button will
flash twice, and when not, flashes five times.

To check if the code works

POWER

Aim your TV’s remote control at the equipment, and press the green
button. If the equipment responds, the programming is completed. If not, try
the next code listed.


If no code is input within the above specified time, or an invalid or
incorrect code number is input, the remote control automatically
goes back to the previous setting.
In some cases, you may not be able to program your remote
control to operate other equipment. In such cases, use the
equipment’s own remote control.
Dead batteries or removing the batteries may cause the
programmable codes to be lost and revert back to factory settings.
Reprogramming the codes may be necessary.

Watching the TV

Manufacturer’s Codes

Manufacturer Code Manufacturer Code
Citizen
332 Sharp 327, 328

DVD Players

Manufacturer Code
Craig 302, 332 Signature 2000 (M. 338, 327

Curtis Mathes
304, 338, 309 Ward)

Sony
751

Daewoo
341, 312, 309 SV2000 338

General Electric
755

DBX
314, 336, 337 Sylvania 308, 309, 338, 310

Hitachi
758

Dimensia
304 Symphonic 338

JVC
756

Emerson
319, 320, 316, 317, Tashiro 332

Magnavox
757

318, 341 Tatung 314, 336, 337

Mitsubishi
761

Fisher
330, 335 Teac 314, 336, 338, 337

Panasonic
753

Funai
338 Technics 309, 308

Philips
757

General Electric
329, 304, 309 Toshiba 312, 311

Pioneer
752, 778

Go Video
322, 339, 340 Wards 327, 328, 335, 331,

RCA/PROSCAN
755

Goldstar
332 332

Samsung
758

Hitachi
306, 304, 305, 338 Yamaha 314, 330, 336, 337

Toshiba
754

Instant Replay
309, 308 Zenith 331

Zenith
760

JC Penney 309, 305, 304, 330,

Cable Boxes

DVD Changers
314, 336, 337

Manufacturer Code
Watching the TV

Manufacturer Code
JVC 314, 336, 337, 345,
346, 347

Sony
230

Sony 765
Kenwood 314, 336, 332, 337

Hamlin/Regal
222, 223, 224, 225,

Panasonic
766

226

LG 332
DVD/VCR Combo Units Jerrold/ 201, 202, 203, 204,

Manufacturer Code
LXI (SEARS) 332, 305, 330, 335,
338

General Inst./ 205, 206, 207, 208,
Motorola 218, 222

Sony 767 Magnavox 308, 309, 310
Oak 227, 228, 229


Broksonic 776 Marantz 314, 336, 337
Panasonic 219, 220, 221


JVC 775 Marta 332
Pioneer 214, 215


Panasonic 777 Memorex 309, 335
Scientific Atlanta 209, 210, 211


Samsung 774 Minolta 305, 304
Tocom 216, 217


Toshiba 773 Mitsubishi/MGA 323, 324, 325, 326
Zenith 212, 213


Zenith
768 Multitech 325, 338, 321

NEC
314, 336, 337

Satellite Receivers

HDD/DVD Combo Units

Manufacturer Code
Olympic 309, 308

Manufacturer Code
Optimus 327

Sony
801

Sony
772, 771, 770

Orion 317

Dish Network
810

5.1ch DVD AV System Panasonic 308, 309, 306, 307

Echostar
810

Manufacturer Code
Pentax
305, 304

General Electric
802

Philco 308, 309
Philips 308, 309, 310

Sony (DAV)
601, 602, 603, 604 Hitachi 805

Hughes
804

AV Receivers

Pioneer 308

Manufacturer Code
Mitsubishi 809

Sony 764

VCRs

Manufacturer Code
Sony 301, 302, 303

Admiral (M. Ward) 327

Aiwa* 338, 344

Audio Dynamic 314, 337

Broksonic 319, 317

Canon
309, 308

Quasar 308, 309, 306

RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329

Realistic 309, 330, 328, 335,
324, 338

Sansui 314

Samsung 322, 313, 321

Sanyo 330, 335

Scott 312, 313, 321, 335,
323, 324, 325, 326

Panasonic 803

Philips 811

RCA/PROSCAN 802, 808

Toshiba 806, 807

Samsung 812

* If an Aiwa VCR does not work
even though you enter the code
for Aiwa, enter the code for Sony
instead.
45





Comments
Search
Only registered users can write comments!

3.26 Copyright (C) 2008 Compojoom.com / Copyright (C) 2007 Alain Georgette / Copyright (C) 2006 Frantisek Hliva. All rights reserved."

 
 
Buy LCD
 


Copyright © 2017 BestBuyLCD. All Rights Reserved. Design by Arte-Web.it